Indoor and outdoor;
Surfaces that concrete, organic or inorganic screed and cement based surface
hardener used.
In concrete pourings in hot weathers.

Fenix Cure is ready to use, should not be thinned with water.

Time to gain mechanic strength: 7 days.
Time to wait between layers: 6 hours minimum.
Time needed for fully drying: 48 hours.
Application thickness: 1-1,5 mm.

Fenix Cure should be Shaked properly
Fenix Cure is used by sprinkling method as a thin film layer,
equally on desired surface.
Identified durations are valid in 20 °C floor or environment temperatures,
in low temperatures duration will be longer, in high temperatures duration will be shorter.
Dekan Boya ve Yapı Kimyasalları San.Tic.Ltd.Şti. is not responsible for application errors
that may occur if the product is used for purposes other than its intended use or if the
application conditions and recommendations mentioned above are not followed.

Stains could be expected due to high rates of different thicknesses.
Gloves, protective glasses should be wore during application.
eye and skin contact must be avoided.