Top coat on exterior thermal insulation systems of all buildings
used as coating material.
• Cement based plasters,
• Exposed concrete surfaces (Fenix Exposed Concrete applied),
• Gas Concrete surfaces (plastered with a cement based plaster),
• Old surfaces (Swelling places on surface must be cleansed, repaired and primed until
surface gets homogeneous before last coating application)
• Not applicable on wet and moisturized surfaces on horizontal surfaces.
• Modified with silicone resin
• It can bridge capillary cracks on plaster without any need of repair.
(2-3mm)
• It repels water 100% due to its hydrophobic structure.It repels moisture with its water
vapor permeability.
• Easy to apply and leaves no roller mark.
• Does not allow the formation of bacteria and mold
• Resists to sunlight (+60°C to -30°C)
• Texture can be made with chosen roller due to its silk matte brightness.
• It should be applied single coat with a coral roller without
watering if on textured primed surface.
• In plain applications it should be thinned with water at a rate
of %10 and be applied to primed surface with pelt roller.
Textured applications: 0,600-0,800 g/m² c
Touching time: 1 hour
Full drying time: 24 hours
Full setting time: 28 days
