It is used as a concrete repair and leveling mortar on interior and exterior facades, walls and ceilings of all buildings.
It is also used as a repair plaster on surfaces before granite and ceramic application.
Usability Duration: Approximately 60 minutes
Appliable Layer Thickness: Max. 5mm (At one time)
Application Thickness: 1-10 mm
Time Duration That Should Be Waited Between Layers: Approximately 3 hours
Surface needs to be dry, clean, and durable.
Surface should be humid before application, must be wet enough under hot and windy weather.
It is not applied on plaster, old paint surface, gas concrete, stone and stone walls.
It is not applied to hollow brick surfaces.
Environment temperature: between +5 °C and +30 °C
It should not be applied in strong winds, areas that under direct sunlight or hot surfaces.
It should not be applied to surfaces that under frost hazard within 24 hours, frozen and melting
Approximately 6.75-7.25 liters of water and 25 kg of Fenix Thin Repairing Mortar should be mixed thoroughly, preferably with a low-speed mixer or trowel so that there are no lumps.
Prepared mortar should be rested for 2 minutes before use.
Mortar should be applied on surface and its thickness should be adjusted with toothed steel trowel. Water should not be added to the hardening mortar.
If more than one coat is to be applied, 3 hours should be waited between coats and the surface should be moistened before applying the next coat. Total thickness should not be over 10 mm.
Surface smoothness should be made with plastic trowel or moisturized sponge.
Surface should be moisturized for 2-3 days after application.
Identified durations are valid in 20 °C floor or environment temperatures, in low temperatures duration will be longer, in high temperatures duration will be shorter.
Dekan Boya ve Yapı Kimyasalları San.Tic.Ltd.Şti. is not responsible for application errors that may occur if the product is used for purposes other than its intended use or if the application conditions and recommendations mentioned above are not followed.
